Select topic:

Introduction

QuickFinish

Spec Sheets & MSDS

QuickClad IPRS

QuickClad is an exterior wall cladding for new and existing buildings.

QuickClad will not crack, blister or delaminate and come with a 10 year guarantee when applied by an approved applicator.

A fire retardant rigid cellular insulation board is secured horizontally to the stud wall frame using QuickClad fixing discs.

Protrusions such as window ceils and decorative pieces can be fitted prior or after the base coat application.

Thickness of QuickClad sheets are 30mm, 50mm or the 80mm to provide a deep reveal appearance.

A specifically designed mineral based 2 pak polymer modified fiber structural mesh reinforced base coat forms a strong waterproof foundation for the desired top coating such as a Textured finish, Rendered finish, Wash appearance, sandstone, scratch roll, spray and trowel etc.

For mass housing projects composites can be applied rapidly by machine.

Download:

QuickClad IPRS Brochure

Architect Specification

QuickClad Technical Data Sheet

Select the appropriate insulation thickness for the appropriate
R-value.

Series 60mm QuickClad
Series 75mm QuickClad

• Design stud frame walls in accordance to the local building code.

• Insulation sheets to be cut as show in diagram below

Table 1: Fire Retardent Foam Sheet

Under Design Building B QuickClad insulation sheet density to be 16kg m³.

Fire retardant QuickClad insulation board manufactured in accordance to A.S. 1366.3 1992 ? QuickClad Systems: A.S. 1530.3 ANZ. 1562.3 B.S. 476 Part 1987
QuickClad boards are coated with non-combustible base and finish coats in accordance to the QuickClad specifications.

Generally, a rebate the thickness of the selected system is installed on the outer edge of slab as shown in the adjacent drawing. A 30mm deep rebate is common, however, rebates are not mandatory. Insulation board can be placed flush to edge on the concrete slab. The tough, flexible 2
Pak polymer plaster will not crack.

Specifying the sheet fixing detail with non-rusting Quick-Clad fixing discs in appropriate wind load regions. Quick-Clad is certified for cyclonic W60 C wind loads.

QuickClad insulation boards are fixed horizontally. Sheet
sizes 2.45m x 1.2m.

Note: Installers to use fasteners as listed below.
Fasteners ** Do NOT use Ribbed Countersunk Heads **

Table 2: QuickClad Fixing Discs

TIMBER STUD FRAME

Flat head galvanised nail FIXINGS

STEEL STUD FRAME

Self-Drilling 10-24 x 65mm CSK TEK SCREWS with Class 2 Coating FIXINGS

Table 3: Frame Fixing

Specifiying the appropriate thickness of composite to suit the particular wind loads in accordance to the test results from BHP NATA certified testing station is show in Table 4.

Note: For cyclonic/typhoon regions strictly use Quickwall
2 Pak mineral base coatings only.
Do not use acrylic coatings.

Table 4: Material Thickness