 |
|
Quick Finish
 |
SANDSTONE
A Seamless, modern but ageless decorative and protective wall coating
system. Plastic trowel finished to provide a smooth textured finish
in 1.5mm, 2mm and 3mm grades. Mimics the face of a freshly cut block
of sandstone. Choice of tough, durable permanent 2 pack Mineral polymer
system or Acrylic system is available. Apply to masonry blocks, bricks,
cement sheet, AAC, QuickBlock, QuickPanel, QuickClad, QuickEasy, QuickFlex
Building Systems.
Specification:
1st Coat Apply Quickwall Skimcoat.
2nd Coat Apply selected grain size of Quickwall SANDSTONE.
3rd & 4th Coats Apply Quickwall AQUASEAL Membrane Paint. |
|
|
| |
 |
QUICK TROWEL
Seamless Vertical Scratch-coat decorative and protective wall finish
in grades of 1.5mm, 2mm and 3mm. Final finish is by plastic trowel
for a smooth flat jointless finish. A popular up-market and timeless
finish. Choice of tough, durable, permanent 2 pack Mineral polymer
system or Acrylic system is available. Apply to masonry blocks, bricks,
cement sheet, AAC, QuickPanel, QuickBlock, QuickClad, QuickEasy, QuickFlex
Building Systems.
Specification:-
1st Coat Apply Quickwall Skimcoat.
2nd Coat Apply selected grain size of Quickwall QUICK TROWEL.
3rd & 4th Coats Apply Quickwall AQUASEAL Membrane Paint.
|
 |
QUICKSAND
A timeless flat render finish similar to a sponge floated sand and
cement plaster. Quicksand will not go drummy or delaminate like sand
and cement render often does. Quicksand is a tough 2 pack polymer
modified mineral based material that bonds to practically any substrate
like QuickPanel, QuickClad, QuickBlock, QuickEasy or QuickFlex building
system.
Specification:-
1st Coat Apply Quickwall Skimcoat
2nd Coat Apply selected grain size of Quickwall QUICKSAND
3rd & 4th Coats Apply Quickwall AQUASEAL Membrane Paint
|
 |
SANTE FE
Where architecture demands a matt wash appearance or adobe flavour
of pre-coloured natural mineral or inorganic effects, Santa Fe is
an award winning good choice. Not recommended for a regular suburban
house design, but excellent where large areas are designed complete
with complimentary adobe fences and Santa Fe artefacts. Apply to any
masonry, brick, and concrete substrate or integrated Quickwall Building
Systems.
Specification:-
1st Coat Apply Quickwall Skimcoat.
2nd Coat Apply selected grain size of Quickwall SANTA FE.
3rd & 4th Coats Apply Quickwall CLEAR SEAL in accordance to the
manufacturer’s instructions.
|
 |
TUSCANI
Bella Italia – best describes this Venetian architectural finish
or inconsistently consistent accentuated brush-marks. This easy to
use synthetically formulated material provides scope for the visionary.
Use deep tones or pastel shades where a consistent depth of field
is required. Super fine textured appearance but smooth to touch makes
Tuscani a coating that can be applied to suit practically any architecture.
Quickwall Tuscani is available in any colour. Apply to any properly
prepared substrate or Quickwall Building Systems.
Specification:-
1st Coat Apply Quickwall Skimcoat
2nd Coat Apply selected Quickwall TUSCANI in accordance to manufacturer’s
instructions.
3rd Coat Apply Quickwall AQUASEAL Membrane Paint.
|
 |
QUICKSTONE
Synthetically colourfast treated stone in practically any colour or
natural colour blends in grades of 1mm, 1.5mm, 2mm and 3mm. Attractive
seamless monolithic fine aggregate finishes. Aggregates can be colour
blended to offer dual, tri or multicoloured effects. QuickStone is
sealed with Quickwall high gloss uv resistant Clear Seal. Apply to
practically any prepared substrate or any QuickBlock, QuickPanel,
QuickClad, QuickEasy or QuickFlex Building systems.
Specification:-
1st Coat Apply Quickwall Skimcoat
2nd Coat Apply selected grain size of Quickwall QUICKSTONE
3rd & 4th Coats Apply Quickwall CLEAR SEAL |
|
|
