Select topic:

Introduction

QuickFinish

Spec Sheets & MSDS

Materials guide

Note: The guide shown below is calculated and relative to a fair substrate with waste to a minimum. 1.5-mm Texture, QuickSand and Plaster Plus "Fine" spread rates are based on application over Skimcoat.

m2	Skimcoat Bags	Polymer Litres	m2	1.5mm Bags	Polymer Litres	m2	Quicksand Bags	Polymer Litres	m2	Plaster Plus Bags	Polymer Litres

80	8	10	80	8	10	80	5.1	6.6	80	10	13
90	9	11	90	9	11	90	6	7.5	90	12	15
100	10	13	100	10	13	100	7	9	100	13	16
110	11	14	110	11	14	110	8	10	110	14	18
120	12	15	120	12	15	120	8	10	120	15	19
130	13	16	130	13	16	130	9	12	130	17	21
140	14	18	140	14	18	140	9	14	140	18	23
150	15	19	150	15	19	150	10	14	150	19	24
160	16	20	160	16	20	160	11	14	160	20	25
170	17	22	170	17	22	170	12	15	170	22	28
180	18	22	180	18	22	180	12	15	180	23	29
190	19	23	190	19	23	190	13	17	190	24	30
200	20	25	200	20	25	200	14	17	200	25	31
210	21	26	210	21	26	210	14	17	210	27	34
220	22	28	220	22	28	220	15	19	220	28	35
230	23	29	230	23	29	230	15	19	230	29	36
240	24	30	240	24	30	240	16	20	240	30	38
250	25	32	250	25	32	250	17	22	250	32	40
260	26	33	260	26	33	260	18	23	260	33	41
270	27	34	270	27	34	270	18	23	270	34	43
280	28	36	280	28	36	280	19	24	280	35	44
290	28	37	290	28	37	290	20	25	290	37	46
300	30	38	300	30	38	300	20	25	300	38	48
310	31	39	310	31	39	310	21	27	310	39	49
320	32	40	320	32	40	320	22	28	320	40	50
330	33	42	330	33	42	330	22	28	330	42	53
340	34	43	340	34	43	340	23	29	340	43	54
350	35	44	350	35	44	350	24	30	350	44	55

content2