|
||||||||||||||
 |
||||||||||||||
 |
144 Granite St. Geebung Qld 4034 Phone: 07 3216 5544 Fax: 07 3216 5533 www.quickwall.com.au info@quickwall.com.au |
|
||||||||||||
|
||||||||||||||
Description |
: |
TRADITIONAL
RENDER is polymer modified dual purpose traditional cement
render for |
| Surface preparation | : | Ensure substrate to be coated is clean and free of dirt, dust, oil grease or any loose material. |
| Application | : | 1. Pour approximately 4 litres of clean water into clean empty 20
lt pail. 2. Slowly add TRADITIONAL RENDER to the water and mix with slow speed / high torque drill using GPML 130mm mixer. Note that high speed mixing or extended mixing time will deteriorate the application and usage of the product. 3. Mix the product to a workable consistency ready for application. 4. Apply to substrate with trowel and level off flat with trowel. 5. Allow to semi-dry before using a float and sponge to create required finish. |
Option B |
: |
TRADITIONAL RENDER can only be used as a thin filament coating e.g. Skimcoat Base Coating, when Quickwall Polymer is added. 4 litres water/polymer solution of 8:1 or a minimum of 500 mls of Quickwall Polymer per 20kg bag. |
Painting |
: |
Allow 48 hours for product to dry before painting
(under normal circumstances). Paint with Quickwall Aquaseal Membrane paint or a high quality exterior paint suitable for masonry surfaces. |
Coverage |
: |
4 – 5 m2 is expected per bag depending on the substrate and applicator. |
| Polymer usage guide | : | TRADITIONAL RENDER (Thin Filament) 8 : 1 WATER : POLYMER |
Guarantee |
: |
Seven years when applied by an Approved Applicator
and in accordance to Quickwall specifications. |
WARNING |
: |
TRADITIONAL RENDER
IS NOT SUITABLE AS A BASE COAT POLYSTYRENE SYSTEMS. TRADITIONAL RENDER MUST BE APPLIED TO A MININUM OF 10mm. |
|
|||||||
